Appliance Home ::

InSinkErator SST-FLTR 2/3-Gallon Stainless Tank and Filtration System

	Our Price: $210.45 List Price: $420.00 Your Save: $ 209.55 ( 50% ) Sales Rank: #1049 (lower is better) Availability: Usually ships in 24 hours Manufacturer: InSinkErator Avg. Customer Rating:
Brand: InSinkErator Color: Grey EAN: 0050375007777 Manufacturer: InSinkErator Model: SST-FLTR Release Date: 2006-07-06 Shipping Weight (lbs): 0.04
InSinkErator SST-FLTR 2/3-Gallon Stainless Tank and Filtration System Features New Stainless Steel Tank for Long Life Dispenses 60 cups/hour of 200°F Water F-201 Filtration System Included for Clean Refreshing Tasting Water Filtration System Reduces Chlorine Taste and Odor 750 Watts, 115V AC
InSinkErator SST-FLTR 2/3-Gallon Stainless Tank and Filtration System Description In-Sink-Erator SST-FLTR Stainless Steel Tank and Filtration SystemDesigned for InSinkErator Instant Hot Water Dispenser faucets, this revolutionary new tank has been engineered for durability, convenience and peace of mind. With a generous 2/3-gallon capacity, it provides 35% more near-boiling 200;F water than our previous model.With its patented top mounted expansion chamber and special aspiration system, this tank delivers on-demand flow and unmatched performance. A thermal protection system provides overheating protection, and the durable stainless steel core means longer life. Tool-free connections allow for easy installation or replacement.In-Sink-Erator SST-FLTR Stainless Steel Tank and Filtration System Features:; F-201 Filtration System included for fresher tasting water; 35% more near-boiling water from larger 2/3 gallon stainless steel tank; Easy to adjust temperature control; Tool-free tank connections and dry start protection to ease installation; Provides 60 cups/hour of near-boiling water; 3-Year We Come To You; In-Home Service Warranty; 115 volts, 750 watts, 6.25 amps; NSF; and UL listed; For use with In-Sink-Erator Series 1100 and other dispenser models, except model HOT1; Capacity: 2/3 gallon tank dispenses 60 cups of 200;F water per hour ; Electrical: 120 volts A.C, 750 watts, 6.25 amp heating element with grounded three (3) prong plug; Thermostat: Snap-action, adjustable from 160;F to 210;F (factory pre-set at 200;F); Insulation: Meets U.L. 94HF-1 flammability specification
Related Items InSinkErator F-HC1100SN Hot and Cold Water Dispenser, Satin Nickel InSinkErator F-201R Filtration Replacement Cartridges, 2-Piece InSinkErator F-HC1100C Hot and Cold Water Dispenser, Chrome InSinkErator F-GN1100SN Hot Water Dispenser, Satin Nickel InSinkErator F-GN1100C Hot Water Dispenser, Chrome
InSinkErator SST-FLTR 2/3-Gallon Stainless Tank and Filtration System customer reviews: InSinkErator SST-FLTR 2/3-Gallon Stainless Tank and Filtration System This is my second under sink hot water heater unit. These are really easy to install even for people with average DIY skills such as myself. I would suggest bolting the metal hangar to your wall permanently. That way, over the years, as you replace these (they only last a few years generally) it will speed up and ease the installation process. Terrible Quality - Heating Element Failed Once and Tank Leaked Twice I would give it a 0, but Insinkerator does send people out to replace the filter, so they get a 1. The product is good, when it works. The problem is that the quality is terrible, and when it fails, it can cause property damage. We purchased this product in early 2006, and as of this writing, it has failed three times. The first time, the heating element failed, and Insinkerator replaced it. The second time, the unit leaked all of its contents out, damaging our wooden cabinetry. When they replaced the unit, I wisely put a bucket underneath it. It came in handy when it failed yet again, dumping all of the water into the bucket I placed underneath it. If you decide to purchase this unit, please make sure that it's accessible for replacement and that you place a bucket underneath it. Check the bucket regularly. Also, make sure that the temperature is set to hot, but not boiling; otherwise, water will constantly run from the dispenser and the unit will burn itself out. Good luck. InSink Erator Too expensive after finding it around town for 1/2. I was in a hurry and bought it online. doesn't work with previous faucets I had good luck with the previous version of this product- it lasted for 9 years before rusting out and leaking. This unit was the only one I saw that was sold with just the tank, and since my faucet works fine, I did not want to buy a new one. I purchased this one, and called a plumber to install it-- of course when he arrived, he said that will not work with the faucet because the new ones are all plastic, and the old ones were metal -- I assumed there would be a way to connect them. Since I had the plumber "on the clock" on just had him go get a new faucet and it was about $400 for just the least expensive faucet in basic chrome!! Not installed. Of course the good folks at Amazon sell it for around $250 but even Home Depot sells it for $375. Gotta love Amazon... I just wish I had realized the part about the faucet before wasting all the money. On the water filter, I already had an everpure filtering system in place, so I skipped the one that comes with the water heater-- looks like that is a good thing as they charge a crazy amount for the replacement filter for the one that comes with this. Looks like they like to get you in the door with the water heater, and then take ya down with the faucet and finish you off with the water filter replacement. Just based on the heater, it looks fine. If you think plastic fittings are a good idea... If you think plastic fittings are a good idea around expensive cabinetry and hardwood floors, this is a the product for you. This model now has two "quick-connect" plastic fittings. My last ISE tank had one, the "Y" fitting connecting the copper pipes to the filter line. It failed after 3 years and soaked the cabinets and hardwood floors to the point of serious damage. Initially I thought I would just replace the "Y" connector, but then I realized that the tank itself showed obvious corrosion. I was determined to buy a different brand, but I was unable to locate a model that would work with the expensive Hot/Cold chrome dispenser/filter unit, so I held my nose and bought this model. It leaked immediately from the now plastic "Snap-Connect Fitting"" which is on the tube carrying the hot water to the dispenser. Yes, believe it or not, the connector on the tubing that carries 190° water is a plastic "Quick-Connect"! And when you call ISE, you'll discover their parts are available only through them. They will get them to you in 7-10 days, and you cannot expedite this by agreeing to pay the shipping costs yourself! If you buy this unit, protect your cabinetry and floors with a water alarm or bucket! I wish I had.
Thanks for shopping at Appliance Home, please visit us again!